UniFi U7 Pro · 250 ft wide × 220 ft deep · 20 ft ceiling

Access point layout

Pick a spacing and the plan redraws: AP positions, approximate coverage, the switch location and every cable run, with runs over the 328 ft Ethernet limit flagged. Use it to plan the install, then confirm with a heat map in UniFi Design Center.

Opens the print dialog. Choose “Save as PDF” as the printer.

Coverage goal

AP spacing50 ft

Pattern

Staggered (honeycomb) rows leave fewer weak corners for the same AP count.

Mounting height

Where the 2 × 48-port switches go

In one rack, APs alternate between the two switches like a checkerboard, so if one switch dies every area still has coverage.

Distances

Roof photo underlay

Total wire, whole project

0 ft

U7 Pros

525 W

PoE+ budget (21 W each)

0 ft

Longest cable run

Runs over 300 ft

2,200

sq ft per AP

13 / 48

Switch 1 ports used

12 / 48

Switch 2 ports used

Floor plan · front at the bottom5 × 5 grid

U7 Pro Approx. strong coverage Switch / closet Run over 300 ft

Install notes

AP	Switch	From left wall	From back wall	Wire on plan	Cable to pull	Status